ANCHOR-IT! is a two-component (3:1 mix ratio by volume) high performance cement and silane hybrid anchoring system with an extended installation temperature range from 5 F to 104 F (-15 C to 40 C). It has been tested for use with threaded rod and reinforcing bar for cracked and uncracked concrete in accordance with ACI 355.4 and ICCES AC308 and has sustained load resistance up to 194 F (90 C). General Uses & Applications Anchoring threaded rod and reinforcing bar (rebar) into either cracked or uncracked concrete Bonding hardened concrete to hardened concrete and freshly mixed concrete to hardened concrete For use in vertical down, horizontal, upwardly inclined and overhead installations Resists static, wind and earthquake loading in tension and shear (IBC Seismic Design Categories A - F) All-season hybrid anchoring system for dry, damp & water saturated concrete Advantages & Features ICC-ES ESR-4151 evaluation report for cracked and uncracked concrete Service temperature range under short term loading conditions between 5 F to 302 F (-15 C to 150 C) Full cure in 45 minutes @ 77 F (25 C) Resists sustained loads up to 194 F (90 C) Withstands freeze-thaw conditions