At Iron World, our products are made from raw steel, giving us the ability to make tubing, posts and pickets of all shapes and sizes. Once the steel has been formed and posts are cut to your size requirements, they go through our extensive coating process. We coat our products using a five stage pre-treatment, ending with a non-chromatic conversion coating to seal the surface and provide additional corrosion protection. Fourteen oscillating, automatic spray guns then apply a polyester powder to the G90 galvanized steel to ensure all parts of the iron fence and gate products are evenly reached with a 3.0-3.5 mil thickness of coating. Our iron fences and gates are coated pre-assembly to ensure a smooth, consistent finish that resists cracking, flaking and peeling at the panels pivot points. This process ensures a full measure of protection in the areas where moisture accumulates and rust begins. Our in-house powder coating line is the largest in the manufacturing industry; over 1200 feet in length and equipped to handle fencing and gates that are up to 50 feet in length, 8 feet in height, and 27 inches in width. To ensure top quality of the powder coating process, two manual gun technicians inspect the final coat of all materials. Once your decorative iron fencing and gates are ready to be delivered, we place them in polyurethane bags and shrink wrap them closed with heat. This ensures that contaminates cannot enter the packaging, preventing scratches and abrasions during transit. Everyone on the Iron World staff is focused on providing the highest quality product and service at a competitive price. No hidden charges the price we provide is complete.